![background image](http://html1.mh-extra.com/html/aandd/ra3100-omniace/ra3100-omniace_instruction-manual_3072739047.webp)
5.Trigger Setup - 5.3.Pre-Trigger
1WMPD4004444
47
Description of trigger source (5)
Trigger filter
The trigger filter function ensures that a trigger is detected when the trigger conditions are met for a
specified period of time, in order to prevent erroneous trigger detection due to noise or chattering in the
signal near the trigger level.
Trigger detection point
Trigger level
CHn input signal
T Trigger filter
5.3.
Pre-Trigger
When performing memory recording, a pre-trigger can be set to adjust the recording length before and
after the trigger detection point in the memory block.
Trigger detection
Trigger level
End measurement
Start measurement
Input signal
Pre-trigger
(post-trigger)
30%
(70%)
Memory block
5.3.1. Pre-Trigger Setup
Tap the
【
SETUP
】
key on the side menu to display the setup menu.
Tap the
【
Recording
】
tab in the recording setup to display the recording setup screen.
The recording device settings are displayed below the recording setup.
Tap
【
Pre-Trigger
】
on the right of memory recording to set the pre-trigger.
Summary of Contents for RA3100 Omniace
Page 1: ...RA3100 Omniace Instruction Manual 1WMPD4004444...
Page 173: ...13 Optional Parts 13 2 List of Probes Clamp Meters 1WMPD4004444 173 MEMO...
Page 174: ...13 Optional Parts 13 4 List of Spare Parts 174 1WMPD4004444 MEMO...
Page 175: ...Omniace RA3100 Instruction Manual 1WMPD4004444 1st Edition...