![background image](http://html1.mh-extra.com/html/aandd/ra3100-omniace/ra3100-omniace_instruction-manual_3072739022.webp)
1.Name and Function of Each Block - 1.6.Screen and Setup Menu
22
1WMPD4004444
1.6.2. Control Bar
The control bar provides a menu for the functions frequently used with the waveform monitor, such as
waveform display control of sampling, etc., thumbnail display, cursor display, and pen recorder control.
Tap the (7) Display switch key on the right edge of the control bar to switch the functions in the order
indicated below.
PENREC (pen recording) is only available when printer recording is selected.
WAVE
⇒
THUMBNAIL
⇒
CURSOR
⇒
PENREC
WAVE (waveform)
(1)
(2)
(3)
(4)
(7)
(1) Sampling speed : Selects the sampling speed. The speed table differs according to the recording
device.
Printer recording : 1 kS/s
(100 ms/div)
to 10 S/s (10 min/div)
SSD recording
: 1 MS/s
(100 μs/div)
to 10 S/s (10 min/div)
Memory recording : 20 MS/s
(5 μs/div)
to 10 S/s (10 min/div)
(2) Data format
: Selects either NORMAL or P-P as the format for the recorded data.
Only P-P is available for printer recording.
Only NORMAL is available for memory recording.
(3) Waveform format : Selects Y-T, X-Y, or FFT as the waveform format.
X-Y display and FFT analysis are only available when SSD recording is set.
(4) Sheet selection
: Selects the waveform set to display on the screen.
(7) Display switch
: Switches the functions in the order WAVE
→
THUMBNAIL
→
CURSOR
→
PENREC .
THUMBNAIL
CURSOR
PENREC (pen recording)
Summary of Contents for RA3100 Omniace
Page 1: ...RA3100 Omniace Instruction Manual 1WMPD4004444...
Page 173: ...13 Optional Parts 13 2 List of Probes Clamp Meters 1WMPD4004444 173 MEMO...
Page 174: ...13 Optional Parts 13 4 List of Spare Parts 174 1WMPD4004444 MEMO...
Page 175: ...Omniace RA3100 Instruction Manual 1WMPD4004444 1st Edition...