AD-4407A Weighing Indicator
Page 47
ENTER
key ......... The key to register the unit weight and return to the
counting mode. The unit weight is calculated automatically
with the weight and the number of samples.
Press
ESC
key while pressing the
+/-
key
The key to return to the counting mode without changing
the unit weight.
Notes
It is preferable to have a large number of samples, to minimize the
counting error.
Press the
ENTER
key after the STABLE mark turns on.
If the total weight of the samples is too light and is not adequate to
be used as the unit weight,
loUt
is displayed for 2 seconds and
returns to the registration display.
Digital Input
When the unit weight is known, digital input is available.
Step 1 Start with the normal weighing mode.
Step 2 Press the
SAMPLE
key.
U
xxx
and the unit weight is displayed with unit
pcs
blinking. Use the following keys:
0
-
9
key ......... The key to set the unit weight. Maximum is 5 digits.
+/-
key ................. The key to select the weight unit of the unit weight.
ZERO
key ........... The key to clear the digital input.
U----
is displayed.
ESC
key .............. The key to return to the the weighing mode without
changing the registered unit weight.
ENTER
key ......... The key to register the unit weight and return to the
weighing mode.
Press the
MODE
key while pressing
+/-
key….The key to shift the
decimal point.
Command Input
When the unit weight is known, command input via the serial interface is
available. For details, refer to “13.3. Command Format”.
12. Counting Function
Summary of Contents for OP-03
Page 65: ...AD 4407A Weighing Indicator Page 65 MEMO ...
Page 66: ...Page 66 AD 4407A Weighing Indicator MEMO ...
Page 67: ......
