English 9
Using the Monitor
Installing / Changing the Batteries
1. Remove the battery cover.
2. Remove the used batteries and
insert new batteries into the battery
compartment as shown, taking
care that the polarities (+ and -) are
correct.
Use only R6P, LR6 or AA batteries.
3. Attach the battery cover.
CAUTION
Insert the batteries as shown in the battery compartment. If installed
incorrectly, the device will not work.
When
blinks on the display, replace all batteries
with new ones. Do not mix old and new batteries. It may shorten the battery
life, or cause the device to malfunction.
Replace the batteries two seconds or more after the device turns off.
If
appears even after the batteries are replaced, make
a blood pressure measurement. The device may then recognize the new batteries.
does not appear when the batteries are drained.
The battery life varies with the ambient temperature and may be shorter at
low temperatures.
Use the specified batteries only.
Remove the batteries if the device is not to be used for a long time.
The batteries may leak and cause a malfunction.
Connecting the Air Hose
Insert the air connector plug into
the air socket firmly.
Connecting the AC Adapter
Insert the AC adapter plug into the
DC jack.
Next, connect the AC adapter to an
electrical outlet.
Use the specified AC adapter.
Air Connector Plug
Step 3
Step 2
Step 1
Air Socket
r socket
AC Adapter Plug
DC Jack
Step 1
Four new AA alkaline batteries will last
approximately one year when used twice
for measurement each day.
Note:
When you unplug the AC adapter from the electrical outlet, please
grasp and pull the AC adapter body. When you remove the AC adapter
plug from the blood pressure monitor, please grasp and pull the adapter
plug. Doing otherwise may cause a fire, electric shock or malfunction.
(LOW BATTERY mark)
(LOW BATTERY mark)
(LOW BATTERY mark)
