A&D GX Series, Instruction Manual

Page: 14 / 35

12
When Pound/Ounce is selected as a weighing unit, enter the values in ounces for
comparison.
In the density mode, comparison is performed to the density obtained.
3-4 Example of Use
The following example uses the AD-8951 comparator light, which is sold separately, to display the
comparison result in red, green, or orange.
1 Using the AX-KO507-W200 cable sold separately, connect the comparator light to the balance
as shown below.
2. Set the “Comparator (
Cp fnc
)” of the balance function table as follows:
Cp 3
Compares the result excluding the data near zero continuously.
Cpin 0
Inputs the upper or lower limit values digitally.
bep 1
Sounds the buzzer for LO.
bep 0
Does not sound the buzzer for OK.
bep 1
Sounds the buzzer for HI.
3. Set the upper and lower limit values as follows:
Cp Hi
101.000 g (Upper limit)
Cp lo
99.000 g (Lower limit)
4. The comparator and buzzer functions as follows, depending on the comparison result.
Weighing data Comparator light Buzzer
90.000 g Orange Sounds
100.00 g Green Does not sound
110.000 g Red Sounds