4
1.
Introduction
This manual describes how the GXM-04, GXM-06 (Comparator output, analog voltage output)
works and how to get the most out of it in terms of performance. Read this manual thoroughly
before using and keep it at hand for future reference.
2.
Features
The following options can be used for the GX
-
M series and GF
-
M series.
GXM
-
04 Comparator output (with buzzer) / External contact input x 2 / RS-232C
GXM
-
06 Analog voltage output / RS-232C
GXM-04: Comparator output / External contact input
The
GXM
-
04 can compare the weighing value and preset threshold values and can output the
result to the contact output.
The GXM
-
04 is equipped with six contact outputs
:
"
HH
", "
HI
", "
OK
", "
LO
", "
LL
" of the
comparison output and "READY" output to indicate the status of the balance.
3-stage comparison or 5-stage comparison can be selected.
The GXM
-
04 can sound a buzzer according to the comparison result.
The GXA-04 is equipped with external control input terminals that can make the RE-ZERO
and PRINT key operations. An optional foot switch (AX
-
SW137
-
PRINT, AX
-
SW137
-
RE-
ZERO) can be used.
GXM-06: Analog voltage output
The
GXM
-
06 can output analog voltage in the following modes
:
"mode where the specified digits of the weighing value are converted to voltage" and
"mode where weighing value is converted to voltage in range between gross zero or net zero
and full scale".
The voltage output range can be selected using the "0V /0.2V " switch on the panel.
It can be selected "0 to 1V" range and "0.2V to 1V" range. The factory setting is "0 to 1V" range.
