34
Input conditions
0: No (Not received)
1: Yes (Received)
1
(Yes)
F- 5
0: No
Negative or unstable weight data are regarded as invalid and are not printed.
1: Yes
Even negative or unstable weight data are regarded as valid and are printed.
Character size
1: Standard character (5x7 dots)
2: Enlarged character (10x7 dots)
1
(
Standard
character)
F- 6
The number of columns/line is 24 for the standard size and 12 for the enlarged size.
key input
0: Disabled
1: Enabled
1
(Enabled)
F- 7
Enables key inputs or disables key inputs other than [SET].
Number of paper
feed lines
0 to 9
2
F- 8
Sets the number of paper feed lines after each time printing and cumulative total
printing.
Print mode
1: Random print mode
2: Batch print mode
1
(Random print)
F- 9
1: Random print mode
•
The random print mode prints the input data in the format set at F10 and perform
subtotal and grand total functions.
•
When the print timing is set to addition only, printing the input data is not performed.
(When F10 is set to 2 or 5.)
2: Batch print mode
•
In the batch print mode, the input data is temporarily stored in a buffer and the data in
the buffer is printed for each channel when a batch print command is input.
•
An 80-line buffer is provided for each channel.
•
The printing format is fixed.
Print timing
1: Manual printing
2: Manual addition
3: Manual addition printing
4: Automatic printing
5: Automatic addition
6: Automatic addition printing
3
(Manual
addition
printing)
F-10
Only available for standard format (F3=1/F9=1).
Manual
Manual printing processes the first valid data that is input within 3 seconds after a print
command is input from [PRINT] or the control I/O. Set the data output of the connected
device to the STREAM mode.
1: Manual printing: Only printing is performed at the print command input.
2: Manual addition: Only addition is performed at the print command input.
3: Manual addition printing: Printing and addition are performed at the print command
input.
Automatic
Automatic printing processes all the input valid data. Set the data output of the connected
device to the automatic print or the manual print mode
4: Automatic printing: Only printing is performed at data input.
5: Automatic addition: Only addition is performed at data input.
6: Automatic addition printing: Printing and addition are performed at data input..