14
11. Insert the printer unit into the printer chassis and tighten the printer cover screws.
12. Feed a small amount of printer paper from the printer.
Note:
•
Do not apply excessive force to the printer unit. If normal, the printer unit can be pulled out
easily. If it is hard to pull out, re-insert it and try to pull it out again.
•
The printer is made of electronic circuits and other precision components and could be
damaged if metallic powder, water or other foreign substances get inside it. Also be careful
of static electricity when the printer unit is pulled out.
If dust or other foreign substances get inside the printer, blow it out with clean air. If the
printer is used in a dusty environment, consider using a dust cover or air purge.
•
A red ending mark appears approximately 1m before the end of the roll paper; replace the
paper when you see this mark. Printing without any paper in the printer may shorten the life
of the printer.
Printer paper