background image

English 

- 7 -   

AD-6121A 

5.1.2. 

Using the batteries 

 

  CAUTION 

 

  When installing the batteries, match the + (positive) and – (negative) terminals to 

those indicated in the battery compartment. 

  Use four type AA batteries.   
  Do not mix old and new batteries. 
  Remove the batteries if the scale is not to be used for a long period of time. The 

batteries may leak and cause a malfunction. 

  If the battery liquid spills on the body, wash the body part under running water 

immediately. 

 

 

 

  When the Low battery mark 

  appears, replace the batteries with four new type AA 

batteries. 

  

Please 

note 

that 

the Low battery mark 

  does not appear when the batteries are 

completely drained. 

 

  Even when the batteries are installed, connecting the AC adapter will make the AC 

adapter effective. 

 

  When the batteries are used, the backlight does not turn on. 

 
 
 

1  Remove the battery compartment cover.   

 
2  Install four new type AA batteries into the battery 

compartment, taking care that the polarities (+) 
and (-) are correct. 

 
3  Replace the battery compartment cover. 

 
 
 

Summary of Contents for AD-6121A























Reviews: