10
© 2016 American Air Filter Company, Inc. Any use of the text or images
this document contains, without permission of American Air Filter
Company, Inc., is prohibited. FabriPulse and AAF are registered
trademarks of American Air Filter Company, Inc. d/b/a AAF
International.
3.6
Weights
Model
Approx. Total Unit Weight
lb.
kg
BV-6
300
136
BVF-6
300
136
BVD-6
200
91
NOTE: This table is for guidance only. The collector delivered may vary,
according to a number of factors such as the addition of accessories or any other
custom changes.
4
PRODUCT SHIPMENT
4.1
How the product ships
Typically, the Fabripulse BinVent dust collector will ship upright on a wooden
skid. The unit will ship using LTL (less than truckload) shipping unless otherwise
agreed with the buyer. Consult AAF International for information on carrier
arrangements.
4.2
Items that ship separately
AAF International may ship items separately. The customer will be notified
which equipment ships separately. Items that ship separately should be set aside in
an area that is clean, dry, and in a place where damage to the equipment will not
occur.
5
PRODUCT RECEIPT AT THE DESIGNATED DELIVERY POINT
5.1
Responsibilities of the customer or customer’s agent
Ensure all loading/unloading equipment and safety equipment is on site at the
time of delivery. Safe and efficient operation of the collector depends on proper
installation. Know proper laws, codes and regulations before installation starts.
5.2
Receiving
Remove crates, tarps, shipping straps, etc. along with any loose items or
equipment before unloading the AAF FabriPulse BinVent.
5.3
Inspection on arrival
The AAF FabriPulse BinVent is normally shipped by truck and should be checked
for damage that may have occurred in route. Compare the collector(s) received to
the description and/or drawing of the collector(s) ordered. Immediately report any
