Page 28 of 60 / IM 798 AE Self-Contained Unit Ventilator
Stub-up through side must be confined to this area: cut in field. Opening must
be carefully prepared and gasketed for air tightnes
s.
Control receptacle with plug-in disconnect (AAF-HermanNelson). Leads are
provided for wire nut connection to all remote controls.
5
/
8
" x 3
5
/
8
" opening (for main power wiring from wall sleeve to chassis). Field
connection by others.
Wall Sleeve Junction Box
Safety Precaution: Reverse this cover when unit is removed from wall sleeve
to cover opening in the end of switch box.
SW1-Main Power Nonfused “On-Off” Switch (AAF
®
-HermanNelson
®
)
.875" Dia. Knockouts (3)
2.5/1.75" Dia. Knockout
1"
9"
5"
16"
Stub-up from bottom must be confined in this area.
SW1-Main Power Nonfused “On-Off” Switch (AAF-HermanNelson)
.875" Dia. Knockouts (3)
Safety Precaution: Reverse this cover when unit is removed from wall sleeve
to cover opening in the end of switch box.
5
/
8
" x 3
5
/
8
" opening (for main power wiring from wall sleeve to chassis). Field
connection by others
.
Wall Sleeve Junction Box
2.5/1.75" Dia. Knockou
t
Control receptacle with plug-in disconnect (AAF-HermanNelson). Leads are
provided for wire nut connection to all remote controls.
5"
5
1
/
2
"
1
/
2
"
6
1
/
4
"
Right End of Unit
Figure 61 - Wall Sleeve With Electric Stub-up From Bottom or Side.
Wall Sleeve
Conduit (by others
)
Rear edge of wall sleev
e
Wall Sleeve
Conduit (by others)
Rear edge of wall sleeve
Right End of Unit
3.0/2.0" Dia. Knockout
Figure 62 - Wall Sleeve With Electric Stub-up From Bottom or Side.
“D” Seal
“D” Seal
Wall Sleeve Electrical Stub-up Details
Step 4 – Wall Sleeve Electrical Connections
