Aaeon SBC-555, Manual

Page: 69 / 72

Chapter 4 Driver Installation 61
Windows NT 4.0
Driver installation
1. Install Windows NT4.0 as you normally would for a VGA display.
First click the Start button, go to Settings and click on Control
Panel. Choose the Display icon and click on the icon. In the
Display Properties window, click on the Settings tab. Then click
on Change Display Type. In the Change Display Type window,
click on the Change button under adapter Type. This will bring
up the Select Device window.
2. Place the Windows
Ô
NT Display Driver Diskette in drive A. In
the Select Device window, click on Have Disk, select "Browse"
and find the NT4.0 driver in the Drive A:\Winnt4.0, and then click
OK. The name of the Chips and Technologies, Inc. Video
Controller driver will appear highlighted in the Modules list box.
Select Chips and Tech. 65554 PCI(new) and Click OK. Click OK
to start the driver installation.
3. Once the installation is complete, the Change Display Type
window will reappear. Click on Close to close the window. Then
the Display Properties window will reappear. Click on Apply.
Restart the system for new settings to take effect.