Aaeon Raptor MicroATX, Installation Manual

Page: 58 / 80

Raptor MicroATX – Installation Guide
48
Mnemonic Code Code System Progress Report
POST_STATUS_
VIDEOROM 2ch Passing control to video
ROM.
POST_STATUS_
POSTVIDEO 2dh Control returned from video
ROM.
POST_STATUS_
CHECKEGAVGA 2eh Check for EGA/VGA
adapter.
POST_STATUS_
TESTVIDEOMEMORY 2fh No EGA/VGA found, test
video memory.
POST_STATUS_RETRACE 30h Scan for video retrace
signal.
POST_STATUS_
ALTDISPLAY 31h Primary retrace failed.
POST_STATUS_
ALTRETRACE 32h Alternate found.
POST_STATUS_
VRFYSWADAPTER 33h Verify video switches.
POST_STATUS_
SETDISPMODE 34h Establish display mode.
POST_STATUS_
CHECKSEG40A 35h Initialize ROM BIOS data
area.
POST_STATUS_
SETCURSOR 36h Set cursor for power-on
msg.
POST_STATUS_
PWRONDISPLAY 37h Display power-on message.
POST_STATUS_
SAVECURSOR 38h Save cursor position.
POST_STATUS_BIOSIDENT 39h Display BIOS identification
string.
POST_STATUS_HITDEL 3ah Display “Hit <DEL> to ...”
message.
POST_STATUS_VIRTUAL 40h Prepare protected mode test.
POST_STATUS_DESCR 41h Prepare descriptor tables.
POST_STATUS_ENTERVM 42h Enter virtual mode for
memory test.
POST_STATUS_ENABINT 43h Enable interrupts for
diagnostics mode.
POST_STATUS_
CHECKWRAP1 44h Initialize data for memory
wrap test.
POST_STATUS_
CHECKWRAP2 45h Test for wrap, find total
memory size.
POST_STATUS_
HIGHPATTERNS 46h Write extended memory test
patterns.