3-9
Chapter 3: BIOS setup
The following item appears when Wake System with Dynamic Time is enabled.
Wake up minute increase [1]
Specify the number of minutes added to the current time before waking up
system. Input value range: [1~5]
Resume from PME# [Enabled]
Enables or disables resume from PCI PME#. Configuration options: [Disabled]
[Enabled]
Resume from PCIE/RI [Enabled]
Enables or disables resume from PCIe devices or RING signals. Configuration
options: [Disabled] [Enabled]
3.4
Chipset menu
The Chipset menu items allow you to change configuration options for the North
Bridge and South Bridge.
3.4.1
System Agent (SA) Configuration
MAX TOLUD [Dynamic]
Allows you to select the maximum memory size of TOLUD (Top of Low Usable
DRAM). Configuration options: [Dynamic] [1 GB] [1.25 GB] [1.5 GB] [1.75 GB] [2
GB] [2.25 GB] [2.5 GB] [2.75 GB] [3 GB] [3.25 GB] [3.5 GB]
Max Link Speed [Auto]
Allows you to configure the PEG 0:1:0 maximum speed. Configuration
options: [Auto] [Gen1] [Gen2] [Gen3]
Graphics Configuration
Primary Display [Auto]
Allows you to decide which graphics controller to use as the primary boot
device. Configuration options: [Auto] [IGFX] [PEG]
Primary IGFX Boot Display [VBIOS Default]
Select the video device which will be activated during POST. This setting
has no effect if an external graphics device is present. The secondary boot
display selection appears based on your selection and the VGA mode is
supported only on primary display. Configuration options: [VBIOS Default]
[DP #3] [LFP] [DP #2]
LVDS [Enabled]
Allows you to enable or disable LVDS (CH7511). Configuration options:
[Disabled] [Enabled]