![background image](http://html1.mh-extra.com/html/aaeon/mix-kluw1/mix-kluw1_manual_3306997023.webp)
2-15
Chapter 2: Motherboard information
6. USB 2.0 connectors (10-pin USB56, USB78)
These USB connectors comply with USB 2.0 specifications.
Never connect a 1394 cable to the USB connector. Doing so will damage the
motherboard.
MIX-KLUW1
MIX-KLUW1 USB2.0 connectors
PIN 1
GND
GND
USB2_DP1
USB2_DN1
+5V
+5V
USB2_DN2
USB2_DP2
GND
GND
USB78
PIN 1
GND
GND
USB2_DP1
USB2_DN1
+5V
+5V
USB2_DN2
USB2_DP2
GND
GND
USB56
7. System panel connectors (10-1 pin F_PANEL)
This connector supports several chassis-mounted functions.
•
System power LED (2-pin PWR_LED)
This 2-pin connector is for the system power LED. Connect the chassis
power LED cable to this connector. The system power LED lights up when
you turn on the system power, and blinks when the system is in sleep mode.
•
Hard disk drive activity LED (2-pin HDD_LED)
This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity
LED cable to this connector. The IDE LED lights up or flashes when data is
read from or written to the HDD.
•
ATX power button/soft-off button (2-pin PWR_BTN)
This 2-pin connector is for the system power button.
•
Reset button (2-pin RESET)
This 2-pin connector is for the chassis-mounted reset button for system
reboot without turning off the system power.
MIX-KLUW1
MIX-KLUW1 System panel connector
PIN 1
PWR BTN
GND
PWRBTN#
PWR_LED-
(NC)
RSTCON#_PANEL
GND
HDD_LED-
F_PANEL
+PWR LED-
+HDD_LED-
RESET