manualshive.com logo in svg

Aaeon GENE-6310, User Manual

Share
Download
Aaeon GENE-6310 User Manual Download Page 74

Chapter 3  Award BIOS Setup    

65

Resources Controlled By

The Award Plug and Play BIOS has the capacity to automatically
configure all of the boot and Plug and Play compatible devices.
However, this capability means absolutely nothing unless you are
using a Plug and Play operating system such as Windows ® 95.  If
you set this field to “manual” choose specific resources by going
into each of the sub menu that follows this field ( a sub menu is
proceeded by a ">")

The choices:  Auto (ESCD), Manual.

IRQ Resources

When resources are controlled manually, assign each system
interrupt a type, depending on the type of device using the
interrupt.

DMA Resources

When resources are controlled manually, assign each DMA
channel a type, depending on the type of device using the DMA
channnel.

PCI/VGA Palette Snoop

Leave this field at Disabled. 

The choices:  Enabled, Disabled.

Assign IRQ for VGA

The choices:  Enabled, Disabled.

Assign IRQ for USB

The choices:  Enabled, Disabled.

Summary of Contents for GENE-6310



































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands