manualshive.com logo in svg

Aaeon GENE-6310, User Manual

Share
Download
Aaeon GENE-6310 User Manual Download Page 66

Chapter 3  Award BIOS Setup    

57

Primary/Secondary Master/Slave UDMA

Ultra DMA33/66 implementation is possible only if your IDE hard
drive supports it and the operating environment includes a DMA
driver (Windows 95 OSR2 or a third-party IDE bus master driver).
If your hard drive and your IDE Cable both support Ultra DMA
33/66 select Auto to enable BIOS support.

The choices:  Auto, Disable.

Init Display First

This item allows you to active PCI slot or onboard first.

The choices:  PCI Slot, AGP.

IDE HDD Block Mode

Select Enabled only if your hard drives support block mode.

                The choices: Enabled, Disabled.

Primary/Secondary Master/Slave PIO

The four IDE PIO (Programmable Input/Output) fields let you set a
PIO mode (0-1) for each of the four IDE devices that the onboard
IDE interface supports.  Modes 0 through 4 provide successively
increased performance.  In Auto mode, the system automatically
determines the best mode for each device.

The choices:  Auto, Mode 0, Mode 1, Mode 2, Mode 3, Mode 4.

Summary of Contents for GENE-6310



































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands