manualshive.com logo in svg

Aaeon GENE-6310, User Manual

Share
Download
Aaeon GENE-6310 User Manual Download Page 49

40

    GENE-6310 User Manual

PnP/PCI Configuration

This entry appears is your system supports PnP/PCI.

PC Health Status

This menu allows you to set the shutdown temperature for your
system.

Frequency/Voltage Control

Use this menu to specify your settings for frequency/ voltage
control.

Load Fail-Safe Defaults

Use this menu to load the BIOS default values for the minimal/
stable performance for your system to operate.

Load Optimized Defaults

Use this menu to load the BIOS default values that are factory
settings for optimal performance system operations.  While
AWARD has designated the custom BIOS to maximize perfor-
mance, the factory has the right to change these defaults to meet
their needs.

Set Supervisor Password

Use this menu to set Supervisor Passwords.

Save and Exit Setup

Save CMOS value changes to CMOS and exit setup.

Exit Without Saving

Abandon all CMOS value changes and exit setup.

Summary of Contents for GENE-6310



































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands