Aaeon Gene-5310, Manual

Page: 36 / 95

Chapter 2 Installation 27
Display connectors (CN9, CN10)
The Gene-5310 can drive conventional CRT displays and is capable
of driving a wide range of flat panel displays. The board has two
connectors to support these displays, one for standard CRT VGA
monitors and one for flat panel displays.
VGA display connector (CN9)
A simple one-to-one adapter can be used to match CN9 to a
standard 15-pin D-SUB connector commonly used for VGA.
Pin Signal Pin Signal
1 Red video 9 DENSITY SELECT
(no pin)
2 Green video 10 Sync return (GND)
3 Blue video 11 Monitor ID (notused)
4 Not used 12 SDA
5 GND 13 Horizontal Sync
6 Red returned(GND) 14 Vertical Sync
7 Green returned(GND) 15 SCL
8 Blue returned (GND)