3-7
Chapter 3: BIOS setup
The following items appear only when you set
Fan Control Mode
to [Auto
Mode].
Temperature Source [SYSTIN]
Allows you to select the temperature source. Configuration options: [SYSTIN]
[PECI Agent 0]
Temperature 1~4 [xx]
Input temperature setting. The values range from 0~255.
Fan PWM 1~4 [xx]
Input the amount of Fan PWM 4 for Smart Fan IV Mode. The values range
from 0~255.
Tolerance of Temperature [xx]
Input the tolerance of target temperature. The values range from 0~7.
Critical Temperature [xx]
Determines the time that Fan Out takes to decrease its value by one step.
The values range from 0~255.
Critical Temp Tolerance [xx]
Input the tolerance of critical temperature. The values range from 0~7.
3.3.8
USB Configuration
The USB Devices item lists auto-detected values. If no USB device is detected,
the item shows None.
Legacy USB Support [Enabled]
[Enabled]
Enables the support for USB devices on legacy operating
systems (OS).
[Disabled]
USB devices are only available when running BIOS Setup.
[Auto]
Allows the system to detect the presence of USB devices
at startup. If detected, the USB controller legacy mode is
enabled. If no USB device is detected, the legacy USB support
is disabled.
3.3.9
Digital IO Port Configuration
The items listed in this screen configure Digital IO settings.
DI0 Port1~DI0 Port4 [Output]
Configuration options: [Input] [Output]
Summary of Contents for EMB-Q170A
