3-4
EMB-Q170A
3.3.3
SATA Configuration
SATA Controller(s) [Enabled]
Allows you to enable or disable SATA devices. Configuration options: [Enabled]
[Disabled]
SATA Mode Selection [AHCI]
Allows you to set the SATA configuration.
[AHCI] Set to [AHCI] when you want the SATA hard disk drives to use
AHCI (Advanced Host Controller Interface). AHCI allows the
onboard storage driver to enable advanced Serial ATA features
that increases storage performance on random workloads by
allowing the drive to internally optimize the order of commands.
[RAID]
Set to [RAID] when you want to create a RAID configuration from the SATA
hard disk drives.
M.2 mSATA, SATA6G_1, SATA6G_2
Port 0, Port 2, Port 3 [Enabled]
These items become configurable when you set the SATA Mode Selection
item to [AHCI] and [RAID], and allow you to enable/disable the SATA port(s).
Configuration options: [Disabled] [Enabled]
Hot Plug [Disabled]
These items become configurable when you set the SATA Mode Selection item
to [AHCI] and [RAID], and allow you to enable/disable SATA Hot Plug Support.
Configuration options: [Disabled] [Enabled]
3.3.4
AMT Configuration
Intel AMT [Enabled]
Allows you to enable or disable Inte
®
Active Management Technology BIOS
Extension. Configuration options: [Enabled] [Disabled]
iAMT H/W is always enabled. This option just controls the BIOS extension
execution. If enabled, this requires additional firmware in the SPI device.
3.3.5
PCH-FW Configuration
Firmware Update Configuration
Me FW Image Re-Flash [Disabled]
This item allows you to enable or disable Me FW Image Re-Flash function.
Configuration options: [Disabled] [Enabled]
Summary of Contents for EMB-Q170A
