Aaeon ECM-5716 Series User Manual Download Page 86

Page: 86 / 131

ECM-5716 Series

ECM-5716 Series User’s Manual

7. Depending on the configuration, a request for the windows disks or CD-ROM may be

necessary. Insert the disk / CD-ROM and click the ‘

’ button. An entry of the

directory for the files may then be required. After typing the path name, click the ‘

’

button.

8. To complete the installation, reboot the computer by clicking the ‘

Yes

’ button in the

window shown below.

9. After the system restarts, the network adapter should be installed. Protocols, clients

etc. may now be installed for the network in use.

Further configuration of the adapter may be made in the ‘

Advanced

’ section of the driver

properties. These options may be accessed through the ‘

Network

’ icon in the control

panel (Select the network adapter, click the ‘

Properties

’ button and select the ‘

Advanced

’

tab).

Summary of Contents for ECM-5716 Series




































































































































Search results

Summary of Contents for ECM-5716 Series

Reviews:

Related manuals for ECM-5716 Series

Brands by name

Popular brands

Aaeon ECM-5716 Series, User Manual

Search results

Summary of Contents for ECM-5716 Series

Reviews:

Related manuals for ECM-5716 Series

Brands by name

Popular brands