![background image](http://html1.mh-extra.com/html/aaeon/ecm-5716-series/ecm-5716-series_user-manual_3213355036.webp)
ECM-5716 Series
ECM-5716 Series User’s Manual
23
3.7.3 Signal Description – Serial Port 1 Connector (COM1)
TxD
Serial output. This signal sends serial data to the communication link. The signal is set to a
marking state on hardware reset when the transmitter is empty or when loop mode operation
is initiated.
RxD
Serial input. This signal receives serial data from the communication link.
DTR
Data Terminal Ready. This signal indicates to the modem or data set that the on-board UART
is ready to establish a communication link.
DSR
Data Set Ready. This signal indicates that the modem or data set is ready to establish a
communication link.
RTS
Request To Send. This signal indicates to the modem or data set that the on-board UART is
ready to exchange data.
CTS
Clear To Send. This signal indicates that the modem or data set is ready to exchange data.
DCD
Data Carrier Detect. This signal indicates that the modem or data set has detected the data
carrier.
RI
Ring Indicator. This signal indicates that the modem has received a telephone ringing signal.
3.7.4 CPU Fan Connector (FAN1)
SIGNAL
PIN
TAC
3
+12V
2
GND
1
3.7.5 Signal Description – CPU Fan Connector
TAC
Fan speed monitor
Summary of Contents for ECM-5716 Series
Page 84: ...ECM 5716 Series ECM 5716 Series User s Manual 71 5 Click the Next button Or ...
Page 85: ...User s Manual 72 ECM 5716 Series User s Manual 6 Click the Finish button Or ...
Page 111: ...User s Manual 98 ECM 5716 Series User s Manual 6 Measurement Drawing ...
Page 112: ...ECM 5716 Series ECM 5716 Series User s Manual 99 ...