User’s Manual
42
ECM-5716 Series User’s Manual
4. AWARD BIOS Setup
4.1 Starting Setup
The AwardBIOS™ is immediately activated when you first power on the computer. The
BIOS reads the system information contained in the CMOS and begins the process of
checking out the system and configuring it. When it finishes, the BIOS will seek an
operating system on one of the disks and then launch and turn control over to the
operating system.
While the BIOS is in control, the Setup program can be activated in one of two ways:
By pressing <Del> immediately after switching the system on, or
By pressing the <Del> key when the following message appears briefly at the bottom of
the screen during the POST (Power On Self Test).
Press DEL to enter SETUP
If the message disappears before you respond and you still wish to enter Setup, restart
the system to try again by turning it OFF then ON or pressing the "RESET" button on the
system case. You may also restart by simultaneously pressing <Ctrl>, <Alt>, and
<Delete> keys. If you do not press the keys at the correct time and the system does not
boot, an error message will be displayed and you will again be asked to.
Press F1 To Continue, DEL to enter SETUP
Summary of Contents for ECM-5716 Series
Page 84: ...ECM 5716 Series ECM 5716 Series User s Manual 71 5 Click the Next button Or ...
Page 85: ...User s Manual 72 ECM 5716 Series User s Manual 6 Click the Finish button Or ...
Page 111: ...User s Manual 98 ECM 5716 Series User s Manual 6 Measurement Drawing ...
Page 112: ...ECM 5716 Series ECM 5716 Series User s Manual 99 ...
