a2b Ferber, Owner'S Manual, Page: 32 / 48

32
Owner`s manual
Do not use paint polish on any of
the plastic parts.
After longer rides, thoroughly clean the
A2B and preserve with a commercially
available anti-corrosion agent.
In the interests of environmental protection, we would ask you to
use care products sparingly and to only use such products that
have been labelled ‘environmentally friendly’.
If the vehicle will be used during the winter months, road salt may
cause considerable damage.
Do not use warm water which increased salt corrosion.
At the end of the trip, immediately clean the vehicle with cold water;
thoroughly dry off the vehicle; treat parts liable to corrosion with
wax borne anti-corrosion agents.
Rubber and plastic parts could be
damaged by aggressive or penetrating
cleaning agents or solvents.
After cleaning and before beginning
your ride, always test your brakes!
Do not use any steam or high-
pressure cleaning devices! The high
water pressure can damage the
gaskets, the battery and the entire
electrical system.
To wash, use only a soft sponge and
clear water.
Polish only with a soft cloth or chamois!
Do not wipe off dust and dirt with a
dry rag (otherwise you may scratch the
varnish and the panelling).
8.0 Cleaning the Vehicle