a2b Ferber, Owner'S Manual, Page: 15 / 48

15
Other functions
The + and - buttons control three functions.
Press and hold + button to turn the
backlight off or on.
Press and hold the - button to activate
pedal assist mode.
Press and hold simultaneously to reset the
trip odometer (TRIP)
* This will also reset
Time (TIME) Average Speed (AVE SPEED)
Maximum speed (MAX SPEED)
Basic settings
Double click on the select button to access
the basic settings menu.
Pressing the select button again will move
through the following screens in order.
* After you set your preferred settings, you
can leave the basic settings menu at any
time by double clicking the select button.
1st screen:
Select Kilometers or Miles
Press + or - to change.
2nd screen:
Setting the brightness
of the backlight
Press + or - to increase
or decrease brightness.
3rd screen:
Setting the contrast
of the screen
Press + or - to increase
or decrease contrast.
4th screen:
Backlight settings
To set the backlight to come
on when the bike is switched
on, press + button to select
the -on-at the bottom of the
display.
5th screen:
Power shut down setting
Set the period at which the
power shuts down for
non-use, to standby.
Press + or - to increase or
decrease from 1 to 9 minutes.
Turning off the System after completing
a journey
Press and hold the select button, for more
than two seconds.