a2b ETX-200, Installation Manual, Page: 14 / 32

14 14
4.3.6 Upload
Update of the ETX-200 firmware or
upload of enhanced functionality is
done via the Upload menu.
NOTE! Always read the Instructions
carefully before starting an upgrade.
Select [Browse] and search for the
correct file on your computer. When
the file is selected press [Upload] and
the file is uploaded into the ETX-200.
When upload is ready you should get
a message “Upload completed”.
Always do a power reset after
finished upload to ensure that the
ETX-200 reboots with the uploaded
software.
Please refer to the installation
information for each specific SW.
4.3.5 LCN settings
Before starting, ensure that you
have selected the correct [Logical
channel type] (see page 13).For
setting the LCN (Logical Channel
Number) you click on the [+] sign
under the column named
[Options]. In the box under the
label [Logical channel number]
you write the LCN number you
want for the service you have
chosen and click the [Set] button
.
Note! LCN is not supported in all
DVB receivers i.e. refer to your
manufacturer for specification for
the DVB receivers in your cable
TV network.
4 Settings (continued)
English