13
13
The ASI output contains the services you have selected for [Digital output].
For decryption you mark the service by a click on the service name line and by clicking
on “Enable” under the [Decryption] headline.
Note! To decrypt more than one service requires a multidecryption CA module and a
smartcard that is activated for more than one service. Some smartcards can handle
two or three services at a time. Please, refer to your smartcard service provider for
further information.
Network settings
Click the [Network settings] button to display the Network settings menu. Here you can
write Network Provider Name, Network ID, Original Network ID, TransportStream ID
and select Logical channel type. When one or more choices has been made, you
have to click on [Save] to store your settings.
The DVB standard recommends following Network ID ranges:
DVB-S: 0 to 8191 (0 should be avoided)
DVB-T: 8193 to 13568 (Boxer in Sweden use 8945)
DVB-C: 40961 to 65281 (ComHem in Sweden 41001 and up)
The ETX-200 is designed to perform remultiplexing fully automatically of both audio
and video streams as well as full remultiplexing and regeneration of PSI/SI data.
The advantage for you as a user is much lower risk of failure and the process is
much less time consuming.
In the menu section
Available
services
all services the unit
receives, both from the [Tuner input]
and from the [ASI input] is listed.
To select the service or services you
want at the [Digital output] mark a
service by clicking the line where the
service is presented and than click
the “Set digital” button. Now an “X”
should appear in the “Dig” column.
Do the same to choose a service as
“Analogue out”. Make your choice of
which services you want to select as
outputs and you will see the selected
service(s) in the [Digital output] list in
the menu.
4 Settings (continued)
English