15
4.2.6 IPTV settings
This menu allows for settings
required to transmit a digital-
TV transport stream as IPTV.
IPTV output is optional and
can be ordered separately.
Note!
To avoid overload it’s not recommended to run other RF
output at the same time i.e. choose ASI as Output. The choosen
bitrate will be the same on the ASI output
For IPTV out you have to set
[UDP/RTP]
values for Port and Address.
For example: IP address 239.192.0.10 and Port 1234. In the box named
”Bitrate” you can choose what bitrate you want on the IPTV TS out and
the maximum value is 55Mb/s. Click
[Set bitrate]
to save settings.
Click on
[Start]
to get the IPTV stream on the output (RJ 45 connector).
To check the IPTV out signal you can use a player like VLC Player. We
recommend that you visit our website
www.a2b.se
for updated info
about this function
.
4. Settings (continued)
4.2.7 CI and Smart card
information
This menu allows you to view
information about your CA
System and current subscriptions.
English
