13
The ASI output contains the services you have selected for
[Digital
output]
.
For decryption you mark the service by a click on the service name line
and by clicking on “Enable” under the
[Decryption]
headline.
Note! To decrypt more than one service requires a multidecryption CA
module and a smartcard that is activated for more than one service. Some
smartcards can handle two or three services at a time. Please, refer to
your smartcard service provider for further information.
Click the “Network settings” and select “Network ID” and “Transport ID”. If
a choice is made you have to click on
[Save]
to store the ID:s. The DVB
standard recommends following Network ID ranges:
DVB-S: 0 to 8191 (0 should be avoided)
DVB-T: 8193 to 13568 (Boxer in Sweden use 8945)
DVB-C: 40961 to 65281 (ComHem in Sweden 41001 and up)
The ECX-200 is designed to perform remultiplexing fully automatically of
both audio and video streams as well as full remultiplexing and
regeneration of PSI/SI data.
The advantage for you as a user is much lower risk of failure and the
process is much less time consuming.
In the menu to the right a list of
all services the unit receives,
both from the
[Tuner input]
and from the
[ASI input].
To select the service or services
you want at the
[Digital
output]
mark a service by
clicking the line where the
service is presented and than
click the “Set digital” button.
Now an “
X
” should appear in the
“
Dig
” column. Do the same to
choose a service as “Analogue
out”. Make your choice of which
services you want to select as
outputs and you will see the
selected service(s) in the
[Digital output]
list in the
menu.
4. Settings (continued)
English
