STEPS:
3. Loop the tensioning rope over the hook of the stake and leave
plenty of slack in the rope.
4. Assemble the 2 piece side poles with the tip (pin) at the top end
of the pole. Insert the side poles into the grommets and reinforce-
ment rings around the perimeter of the tent top. Erect side poles and
leave just short of vertical.
5. Assemble and erect the center pole(s):
10x- 3pc center pole measuring 9’4”
15x- 3pc center pole measuring 10’5”
20x- 4pc center pole measuring 12’6”
From underneath the tent, poke the tip (pin) of the center pole
through the ring at the peak and push the fabric toward the sky until
the center pole is vertical.
6. Straighten the side poles around the tent so that they are vertical
and plum. Use the rope tensioners to pull the tent top tight. Be care-
ful that you do not over tension one side of the tent as it will pull the
opposite side out of vertical.
7. Tie off the jumper ropes. Connected to each reinforcement ring at
the peak is a 1/4” polypropylene rope that should be tied to the cen-
ter poles to prevent the top from lifting off the center poles during
windy conditions.
8. Install any sidewall needed by clipping the top hooks of the wall to
the rope-line just under the valance of the tent.
211 PEACH WAY, COLUMBIA, MO 65203 • 575.474.7881
|
323 MIDLAND DRIVE, JEFFERSON CITY, MO 65101 • 573.635.1516
WWW.A1PARTYFUN.COM • [email protected]
