User Manual of Digital Video Recorder
28
2.2
Using the Wizard for Basic Configuration
By default, the Setup Wizard will start once the DVR has loaded, as shown in
错误！未找到引用源。
.
Steps:
1.
The Setup Wizard can walk you through some important settings of the DVR. If you do not want to use
the Setup Wizard at this time, click the
Cancel
button. You can also choose to use the Setup Wizard next
time by leaving the “Start wizard when device starts?” checkbox in checked status.
Figure 2. 3
Start Wizard Interface
2.
Click
Next
button on the Wizard window to enter the
Login
window, as shown in Figure 2. 4.
Figure 2. 4
Login Window
3.
Enter the admin password. By default, the password is 12345.
You are highly recommended to change the default password right after the first login to avoid safety
problem.
4.
To change the admin password, check the
New Admin Password
checkbox. Enter the new password and
confirm the password in the given fields.
5.
Click the
Next
button to enter the date and time settings window, as shown in Figure 2. 5.
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]
