User Manual of Digital Video Recorder
57
5.1
Configuring Encoding Parameters
Before you start:
1.
Make sure that the HDD has already been installed. If not, please install a HDD and initialize it.
(Menu>HDD>General)
Figure 5. 1
HDD- General
2.
Click
Advance
to check the storage mode of the HDD.
1)
Whether the HDD mode is
Quota
, please set the maximum record capacity. For detailed information,
see
Chapter 10.5 Configuring Quota Mode
.
2)
If the HDD mode is
Group
, you should set the HDD group. For detailed information, see
Chapter 5.9
Configuring HDD Group for Recording
.
Figure 5. 2
HDD- Advanced
Steps
:
1.
Enter the Record settings interface to configure the encoding parameters:
Menu>Record>Encoding
Figure 5. 3
Record Encoding
2.
Set the encoding parameters for recording.
1)
Select the
Record
tab to configure.
2)
Select a camera number in the camera dropdown list.
You can configure the stream type, the resolution, the video quality and other parameters on demand
for Main Stream (Continuous) and Main Stream (Event) respectively.
The
Input Resolution
of camera connected will be displayed in the live view for 5 seconds when the
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]