background image

Failure  to  take  preventive  protective  measures  may  result  in  damage  to  the  product  

and/or  its  functions  or  something  in  its  vicinity.

Accumulators  are  usually  used  as  energy  stores  in  a  PV  system .  These  are  colloquially  

referred  to  as  rechargeable  batteries  or  batteries.

NOTE:

Solar  charge  controllers  are  used  in  conjunction  with  a  photovoltaic  system.  These  are  also  

referred  to  as  PV  systems.

This  symbol  indicates  text,  hints  or  tips.

Injury  or  death  can  result:

Indicates  information  about  recycling.

Warnings  and  notes  are  identified  by  the  appropriate  symbols  (pictograms)  and  must  be  

observed,  otherwise  they  will  be  lost

Danger  high  voltage.

ENVIRONMENT:

Make  use  of  the  certified  and  professional  recycling  service  of  

our  AKKU  SYS  team.

WARNING!

Identifies  assemblies  or  parts  that  must  be  disposed  of  properly.  Do  not  throw  them  
in  the  household  waste.

Warning  when  handling  accumulators.

In  this  manual,  the  abbreviation  MPPT  stands  for:  Maximum  Power  

Point  Tracking.

on  the  hotline  +49  4101/376760,  

[email protected]  

or  use  the  QR  

code:

General  warning  of  danger  spots.

1.  Symbols  and  abbreviations  used

page  

4

02/2022

MPPT  solar  charge  controller  X45/10

operation  manual

For  more  information  contact  us  by  phone

Machine Translated by Google

Summary of Contents for X45/10

















Reviews: