A SYSTEMS DMP1616, User Manual

Page: 6 / 28

4
English
DMP1616 / DMP1616D
CONTROLS & SETTINGS
FRONT PANEL
1. Mounting Holes
These holes are for mounting the DMP1616 on a standard
19” rack.
2. Power Switch
Flick this switch to sturn the unit on or put it on standy. Be
aware that the power switch can be disabled through the
Asystems DMP1616 software.
3. Power LED
This LED indicator will illuminate when the DMP1616
is activated – whether by switch or through the remote
software.
4. Disable LED
This LED will light up when the power switch is disabled.
When this occurs, the DMP1616 cannot be turned on or
put on standby via the front panel switch. This function is
disabled within the Asystems PC software.
5. Output LEDs
The Channel Output LEDs will light up green when an
output signal is present on the corresponding output mix.
It will also flash red when the output channel clips. In this
event, you can reduce any excessive input signals, or turn
down your master output mix level through the control
software.
6. Input LEDs
The Channel Input LEDs will light up green when an
signal is present on the corresponding input mix. It will
also flash red when the input channel clips. In the event
that an input signal flash red, you can either reduce any
excessive input signals or reduce the input level within the
DMP1616 software.
2 3 4
6
5
1