A SYSTEMS DMP1616, User Manual

Page: 15 / 28

13
English
DMP1616 / DMP1616D
Input Source Controls
This page offers numerous options for Input mixes. This
includes selecting the input source from the analog input
or Dante, adding trim, and inverting the signal phase.
They all include:
Trim: Trim the incoming signal slightly if noticeably high.
On/Off: Turn the corresponding input on and off.
Name: Name the input in this window, directly next to the
on/off button.
Input Source: Select from either the analog input or the
Dante input.
Level: Adjust the input level of each of the individual
signals. The signal can be adjusted using the virtual faders
to the right of the display, each of which corresponds with
an input (as numbered).
INV: This button will invert the phase of the corresponding
signal.
Dante Tx Controls
When signals are sent out of the Dante interface from the
DMP1616, the controls on this page allow users to adjust
various properties of these signals. These include:
Faders: Adjust these faders to adjust the outgoing signal
levels as sent to the corresponding Dante send mix.
INV: This button will invert the phase of the corresponding
input or matrix signal.
On: This button allows you to turn the corresponding
input signal on and off. When turned off, the signal will
not be sent to any of the matrix outputs selected.