A/S WODSCHOW & CO RN10 VL-2 Operating Instructions Manual Download Page 8

Page: 8 / 20

Before starting the mixer:

•

Put the desired tool into the bowl

•

Place the bowl in the bowl arms

• Turn the tool to lock it into the bayonet fitting.
•

Attach the safety guard

•

Raise the bowl to its working position by means of the

handle for bowl lift.

•

The mixer is ready for start

Start the mixer:

Push

to start the mixer.

Push

to increase the speed.

Push

to reduce the speed.

Or push

to choose one of the fixed

speeds.

The speed indicator below the fields

shows the

mixing speed of the tool.

Four fixed speeds:

For quick choice of speed, use the fields

Field

corresponds lowest speed, aprox. 110 RPM.

Field

corresponds aprox. 212 RPM.

Field

corresponds aprox. 318 RPM.

Field

corresponds maximum speed, aprox. 420 RPM.

It is possible to change the fixed speeds - see the para

graph

„Change of fixed speeds“

Indication of operation time:

Before starting the mixer, an operation time for the mixer can

be chosen by pushing

. The operating time will be

shown in minutes and seconds in the timer field between

and

The maximum operating time is 60 minutes.

Inspection of the ingredients during operation:

If it is wished to stop the mixer without reducing operation time

and speed, push

. The mixer will reduce speed and then

stop, the operation time will also stop.

It is now possible to lower the bowl to check the ingredients.

Raise the bowl and push

, and the mixer will start and will

increase the speed to the speed chosen before pushing

The operating time will also be continued.

If the bowl is lowered while the mixer is stopped, the operating

time is reset, and

must be pushed to restart the mixer.

Stop the machine:

To stop the machine:

•

Press

. Running time will be reset.

•

Press

. Running time will not be reset.

•

Press the emergency stop - the running time will be reset.

•

Remove the safety guard - the running time will be reset.

•

Lower the bowl - the running time will be reset.

In all cases the mixer can be restarted by pressing

It will start at the lowest speed.

Start/Stop

Pause

REMIX-function

Time up

Text field (timer)

Time down

Fixed speeds

Speed indicator

Speed down

Speed up

peraTinG

The

mixer

Emergency

stop

Summary of Contents for RN10 VL-2





















Search results

Summary of Contents for RN10 VL-2

Reviews:

Related manuals for RN10 VL-2

Brands by name

Popular brands

A/S WODSCHOW & CO RN10 VL-2, Operating Instructions Manual

Search results

Summary of Contents for RN10 VL-2

Reviews:

Related manuals for RN10 VL-2

Brands by name

Popular brands