45
95
Open :
96
98
Off / Closed :
99
1
Inner Sensor :
2
3
S- Open Safety :
4
5
S-Closing Safety :
6
7
Mat :
8
9
Interlock :
10
OO
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
The ES90 Swing door operator can be equipped with an add-on board to allow manual adjustment of
door speeds & timers plus additional switching of certain functions.
Also equipped with a 7 segment display, this allows not just status codes to be displayed but also error
messages.
ES90 DISPLAY / ADJUSTMENT BOARD
No Communication with Slave Door :
Main Power Failure on Master Door :
Main Power Failure on Slave Door :
M-Closing Safety :
Outer Sensor :
Voltage Act :
Outer Sensor Active Constantly :
M- Open Safety :
Key Entry :
Monitored Sensor Failure on Slave Door Closing Face Safety :
Battery Low Voltage - Slave Door :
Home Position Not Found - Master Door :
Home Position Not Found - Slave Door :
Fault Codes
Status Codes
Program Mode Setting Codes
Exit Only :
Automatic :
Inner Sensor Active Constantly :
Key Input Active Constantly :
Monitored Sensor Failure on Master Door Open Face Safety :
Monitored Sensor Failure on Slave Door Open Face Safety :
Monitored Sensor Failure on Master Door Closing Face Safety :
Door Blocked - Master :
Door Blocked - Slave :
Fire Alarm Input Active :
Emergency Stop Input Active :
Battery Low Voltage - Master Door :
Options-Display/Batteries
The Display / Adjuster board is fitted to the hinge side of the unit and fitting bracket is provided in the
kit to fit the board to using M3 stand-off’s.
This bracket also is used when battery backup is required. Additional battery extension leads are
provided and the battery monitoring needs to be turned on within the operator settings.
Or indeed if both Display / Adjuster board & Battery Backup is required
