20
The next step is to install the operator end plates. These are plastic and once aligned, will knock gently
by tapping into place using your hand or a soft mallet. No fixings are required.
Each end plate has (2) lugs which align with the backplate channel profile.
Installing the “End Plates”
Installation
With a standard operator, one of the end plates will contain the “3” position rocker ” switch for setting
the modes.
On a single & double door with separate operators, this can be placed either end.
On a double door set with extended cover fitted, this will need to be fitted on the hinge side.
This is connected to the “mode switch connection terminal” on the control unit with the supplied cable
