21
FiGUre 22. SUMMArY STATUS pAGe
CoNFiGUre bUTToN
Pressing the Configure button (bottom left) on the Status page
opens the Configuration page.
The S7999B Configuration page does not have a “Display Setup”
button.
The configuration page allows the user to view and set parameters
that define how the connected R7910A functions in the hydronic
heating system. All parameters are factory configured and only
a Field Service Agent must perform the configuration settings.
The configuration page contains a menu of parameters grouped
into functional areas that the user selects for configuration (see
Figure 23).
No specific order for configuration is required. All parameters
are enabled for editing, though some may not be applicable
(e.g., a configuration parameter may disable a control feature).
Selecting a parameter group from the menu displays parameters
exclusively applicable for the functional group on the page (see
Figure 24). These parameters can be edited, and when the user
is finished, control returns back to the configuration menu page.
Each parameter is displayed in its group. If there are more
parameters than will fit on the screen, a vertical scroll bar allows
the user to scroll up and down to view all parameters. The
parameter name is displayed on the left and the current setting is
displayed in the text box on the right.
STATUS or hoMe pAGe
A status (summary) page (Figure 22) is displayed when the
S7999B display is connected. This status page appears on the
S7999B when the Burner control icon is pressed on the “Home”
page. The status page displays the current condition of the burner
control and displays some of the more important configuration
settings.
The boiler name associated with the burner control is displayed
in the title on the status page.
NOTE: When the burner control has no boiler name defined,
Modbus address is used to identify the boiler.
The initial status page displayed contains summary status
information as shown in Figure 22. Any status information not
applicable for the installation is grayed/blanked out on the screen.
Buttons on this screen include:
• Configure:
used to configure the burner control
(password protected).
•
operation:
used to perform daily or frequent functions
with the burner control, such as setpoint adjustment, etc.
•
Diagnostic:
used to view burner control diagnostic
information.
•
Details:
used to view burner control detail status
information.
•
history:
used to view burner control history
•
pump:
used to expand the pump status information.
•
Modulation:
used to toggle between status displays:
pump, setpoints, and modulation.
FiGUre 23. CoNFiGUrATioN MeNU pAGe
FiGUre 24. SAMple CoNFiGUrATioN pAGe
Summary of Contents for XB-1000
Page 10: ...10 LIGHTING AND OPERATING INSTRUCTIONS...
Page 20: ...20 Figure 21 s7999B display page flow...
Page 48: ...48 NOTES...
