A.O. Smith Puritee+ Hot, User Manual

Page: 19 / 44

Figure 22
Do not connect hot water to the product.
(Figure 22)
Note: It is recommended not to switch off the water purifier and/or turn off the water supply to
the product when it is not been used for more than 24 hrs. The purifier has an in-built
cleaning mechanism which cleans the RO membrane every 24 hrs by flushing it. This
protects the RO membrane and ensures longer life.
Drain
Overflow
water tube
Inlet water
tube
Make sure that the water purifier is
installed close to inlet water connection
(not more than 1 meter) and drain. The
overflow water tube should not be more
than 1.5 meters. Avoid sharp bend to the
pipes. (Figure 21)
Figure 21
15
Figure 24
Connect the product to the power supply
only with the plug that is provided with
the purifier. (Figure 24)
Figure 23
Check the pressure of the inlet water
before installing the product. (Figure 23)
0.24
5
15
20
25
30
35
10
6
8
Mpa
psi
0.6
0.1
0.13 0.17
0.2
Note:
• Check system input pressure should be in the range of 7 psi to 30 psi.
• In case it is more than 30 psi, use of pressure reducing valve is recommended.
• In case it is less than 7 psi, use of pressure booster pump is recommended.
• Ensure you buy them from A. O. Smith
Company Service technician.
Heater
CAUTION