6
Power
Option
Press the “Power Option” button to choose input mode alternately between “Low Power” (1000 W),
“Half Volume Quickly” (1500 W) and “Full volume Quickly” (2500 W) in the normal working status. The
system default is “Low Power”.
7
Instant
Heating
At start-up without heating, heating begins and LED heating icon turns on after “Instant Heating”
button is pressed. The heating continues until the set temperature is reached. You can exit the heating
mode by pressing the “Instant Heating” button again during the instant heating mode.
8
Electric
Leakage
Detection
The Ground Fault Circuit Interrupter (GFCI) cuts off the power completely when an unsafe electrical
condition is detected, during which the “Reset On” button jumps up, the power indicator lights turn
off or turn from green to orange. If the normal condition cannot be re-attained by pressing the "Reset
On” button, you should call the Customer Care Centre immediately.
Caution
:
Users should regularly test whether the functions of the GFCI are normal. The method of
testing is as follows: When the power indicator light turns on (green), press down the “Test
Off” button, the power indicator will be turned off, then press “Reset On” button again. The
power indicator (green) will be turned on, which indicates that the GFCI is in good condition,
otherwise there is a failure in the GFCI and service should be called for immediately.
9
Safety
Valve
Function
Detection
During the course of heating, it is normal for the outlet of the safety valve to drip. Under normal
conditions, the handle of the safety valve should be opened regularly (move the handle of the pressure
relief valve) to eliminate calcium carbonate. If the water is flowing, then the safety valve is operating
normally. Otherwise, please call the Customer Care Centre.
10
Black
Summary of Contents for Jaguar CEWHR
Page 2: ...Black...
Page 19: ...Black...
