NEED HELP? GIVE US A CALL
877.333.7108
STEP 6
Sanitize and Install Water Tank
1. Open water tank valve. Valve should be
pointing towards the valve port.
2. Insert one end of yellow tubing into the
quick connect port that is pre-installed on
the top of the water tank.
3. Using included eye dropper, add 3ml
bleach into the open end of the attached
yellow tubing.
Note: Sanitation step will be completed
during the pressure test and flush step of
installation.
4. Place water tank on the tank stand in an
area that is near the system manifold.
5. Connect water tank to system manifold.
Do so by connecting one end of the
yellow tubing to the open end of the
water tank. Connect the other end of the
yellow tubing to the yellow inlet port
on the backside of the system manifold,
labeled, ‘tank’.
CLOSED
OPEN
INSTALLATION GUIDE
5
