NEED HELP? GIVE US A CALL
877.333.7108
Fully connect filter cartridge to system
head by placing it into the mounting
brackets, then pushing up and turning
the cartridge to the right until it locks
into place.
Turn off COLD water supply
(1). With an adjustable wrench,
disconnect water line (2).
Attach dual port adapter to
shutoff valve and re-attach
COLD water line to the dual
port adapter (3).
INSTALLATION GUIDE
3
STEP 4
Insert Filter Cartridge
STEP 5
Turn Off and Disconnect Water Line
1
2
3
1
2
P/N-2
P/N-3
2. After penciling in the mounting placement, use a 7/32" drill bit to drill holes
for plastic anchors. Carefully tap anchors into the drilled hole with a hammer.
3. Using a Phillips head screwdriver, mount the system head and mounting
brackets using the provided screws. Ensure that the bracket marked P/N-2 is
closest to the system head.
STEP 3
Mount System Head (cont. from page 2)
