NEED HELP? GIVE US A CALL
877.333.7108
Installation Options
1. Vertical
2. Horizontal wall mount
3. Horizontal floor mount
(mount the system to the
floor of your cabinet)
1. Lightly place advanced system head onto
filter cartridge (do not fully attach) and
determine a suitable area under the
sink to mount the system.
2. Locate a suitable area under the sink to
mount the system. Three (3) inches of
clearance from the base of the filter cartridge
is needed for easy replacement. The advanced
system head must be installed less than three
(3) feet from the COLD-water inlet valve.
3"
INSTALLATION GUIDE 2
STEP 1
Prepare for Installation
Note: Remove advanced system head
before proceeding to step 3.
STEP 2
Mount System Head (cont. on page 3)
1. Place system head in desired mounting
location and use a pencil to mark the
top left mounting hole. Referencing
the mounting hole chart, use a level
and measuring tape to mark the
remaining holes for the system head
and mounting brackets.
