A-Neuvideo HD-88G Instruction Manual Download Page 9

BACK PANEL

BACK PANEL

7

Power Jack:

DC Jack - Inner OD 

 2.1mm (+ )

 

          Outside OD 

 5.5mm (GND)

Power input - 12VDC, 5A

IR Extender Jack:

Female Jack - inner OD 

 3.5 mm

Remote port :

D-SUB-9pin Female connector

Remote port : 

Control the switcher RJ-45 

Female connector

Ethernet Port: 

Note: the Ethernet port and 

RS-232 port cannot be used simultaneously. 

Any connection to the Ethernet port will disable 

serial commands send to the RS-232 port.

HDMI Digital Video/Audio Connector:

HDMI Female connector.

Note: With the proper adapters, the switcher 

can be used with DVI digital video signals HDCP 

compliant. DVI does not support audio.

HDMI Digital Video/Audio Connector:

HDMI Female connector.

Note: With the proper adapters, the switcher 

can be used with DVI digital video signals HDCP 

compliant. DVI does not support audio.

HDMI Digital Video/Audio Connector:

HDMI Female connector.

Note: With the proper adapters, the switcher 

can be used with DVI digital video signals HDCP 

compliant. DVI does not support audio.

 

DC POWER INLET

The Switcher is 

fi

 tted with a DC power plug input connector. Ensure 

that the used is of an approved type and is of suf

fi

 cient current carrying 

connector capacity with the correct voltage and connector polarity. 
12Volt DC power supply 5A Max (Center pin positive).

 

IR EXTENDER CONTROL

Support one of IR Extender (IR input). Extend distance maximum 
984 ft (300 M)

 Note: DO NOT install or remote this connection with 

the power ON.



RS-232 CONNECTION

RS-232 control port to allow for interfacing to a PC a computer 
or touch panel control, to the switcher via this DB-9pin Female 
connector for serial RS-232 control. 

 

ETHERNET CONNECTION

ETHERNET control port to allow for TCP/IP interfacing to a PC
Such as a computer or touch panel control (not a web-browser),
to the switcher via this RJ-45 Female connector to control switcher.



PREVIEW OUTPUT-01 HDMI

Connect a signal link of HDMI direct digital video/audio to this female 
HDMI connector. This connector supports HDMI digital video/audio 
and DVI digital video sources. Preview port HDMI signal as the same 
as Output 1.

 

INPUTS- 1,2,3, & 4 HDMI

Connect a signal link of HDMI direct digital video/audio to this Female 
HDMI connector. This connector supports HDMI digital video/audio 
and DVI digital video sources. HDMI Digital Video/Audio, Connector 
with 

fi

 x screw Input 1 ~ Input 4.

 

OUTPUTS- 1,2,3,& 4 HDMI

Connect a signal link of HDMI direct digital video/audio to this Female 
HDMI connector. This connector supports HDMI digital video/audio 
and DVI digital video sources. HDMI Digital Video/Audio, Connector 
with 

fi

 x screw Output 1 ~ Output 4.

Summary of Contents for HD-88G






















Reviews: