manualshive.com logo in svg

A-Neuvideo HD-88G, Instruction Manual, Page: 4 / 21

Share
Download
A-Neuvideo HD-88G Instruction Manual Download Page 4

PACKAGE CONTENTS & FEATURES

PACKAGE CONTENTS

Before attempting to use this unit, please check the packaging and make sure the following items are contained in the shipping carton:

•  Main switch console unit
•  RS-232 V2.0 Protocol Instructions
•  Ethernet V2.0 Protocol Instructions
•  Master wireless IR Remote Control (SW-HD88)
•  19 inch Ear mount bracket (Part # 1U-440L)
•  SB-100 IR Extender distance ~984 ft (300M) Receiver set
•  SB-100C IR Extender distance 6ft(2M) Receiver Cable
•  CD Contents : Windows GUI, ISP V1.0 Windows driver
•  RS-232 Cable 6 ft (2M)
• ISO Screws
• Operating Instructions

Worldwide Universal Power Supply: DC12V, 5A, Input: (100~240 VAC, AC 50/60Hz.)

FEATURES

•  8x HDMI digital source devices matrix switched to 8x HDMI devices.
•  HDMI digital video w/embedded audio, DVI format and CEC/HDCP 2.0 compliant
•  Seven (7) function key control and worldwide (7) EDID modes for HDTV resolutions
•  Link speeds of up to 6.75 Gbps (link clock rate of 340Mb Hz), Supports HDMI 1.4a 3D formats
•  Wide range of HD resolutions from PC XGA to WUXGA 1920x1200 and HDTV/DTV resolutions 480i/480p, 576i/576p, 720p, 1080i & 1080p
•  Compatible with all HDMI source devices, PC monitors, Plasma HD display, HDTV and audio receivers/ampli

fi

 ers

•  Digital Video TMDS formats resolutoins up to 1080P-60 with Deep color 36-bit
•  Digital Audio Support : Dolby TrueHD, Dolby Digital, Dolby Digital Plug/ex, DTS, DTS-HD, DTS-HD Master, DTS-EX, PCM, PCM2, LPCM2
•  Various User Interface control:

•  Windows based GUI control via RS-232 port
•  Windows based GUI control via TCP/IP port (not a web-browser)
•  Front panel push button
•  IR wireless remote control
•  Third party RS-232 controller (via simple ASCII)
•  Ethernet TCP/IP control switch (via RJ-45 connector)

•  Supports world wide control functions: ALL/OFF/RECALL/ENTER/MEMORY/EDID/LOCK
•  Supports EDID modes :

•  Embedded EDID modes : FSS/H24-3D/H24-3D-M/H36-3D/H36-3D-M/DVI-D 1280x1024-60Hz/DVI-D 1920x1200-60Hz
•  External modes : Learning mode

•  Automatic scanning input & output status via LED show on front panel
•  Support preview output port simultaneously output #1
•  Support IR Remote and IR Extender with distance up to ~ 984 ft (300M) Maximum
• EDID con

fi

 guration via Internal modes

•  Consumer Electronic Control (CEC) switch all open or OFF

The Switcher will remember that last state during a power cycle. When power is removed and resorted, the last con

fi

 guration will be invoked.

2

Summary of Contents for HD-88G






















Reviews:

No comments