TABLE OF CONTENTS
CONTENTS
INTRODUCTION ................................................................1
PACKAGE CONTENTS & FEATURES..............................2
SPECIFICATIONS............................................................3
FRONT PANEL .................................................................4
REAR PANEL ....................................................................7
TYPICAL APPLICATION ..................................................8
REMOTE CONTROL .......................................................10
IR EXTENDER ................................................................. 12
EDID FUNCTION ............................................................14
RS-232 SERIAL INTERFACE ...........................................17
INTRODUCTION
The HD-88G is professional 8x8 matrix routing switch. Supporting
eight (8) HDMI inputs and (8) HDMI outputs and (1) preview output
(same as Output #01). The HD-88G is based on the HDMI standard
and supports full resolution HDMI Video with embedded EDID.
With a signal bandwidth of 340Mhz, there is no signal degradation.
High De
fi
nition Digital signals can be selected and distributed from
any (8) inputs to any (8) outputs in any combination. The Switcher
is certi
fi
ed as being fully CEC and HDCP 2.0 compliant, full HD
HDMI V1.4a 3D formats, data rates up to 6.75 Gbps. Supports
UXGA/WUXGA/DVI 1920x1200 resolution to any HD displays.
The switcher is certi
fi
ed as being fully HDMI and HDCP compliant,
with RoHS,CE,FCC certi
fi
cation. Supports high resolution HDMI
sources routed to HDMI displays, monitors, projector or audio
receivers. The EDID management can be selected between
seven (7) different modes. Control is provided via front panel
push buttons, IR remote, RS-232 or TCP/IP (not a web-browser).
An RS-232 Windows GUI interface is provided for matrix routing
control (Windows only).
1
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of
fi
re,
electrical shock and injury to persons.
• To prevent
fi
re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the
PSU if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow
for suf
fi
cient space for air to circulate around the unit.
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. We assume no responsibility for any
infringements of patents or other rights of third parties which may
result from its use.
We assume no responsibility for any inaccuracies that may be
contained in this document. We make no commitment to update or
to keep current the information contained in this document.
We reserve the right to make improvements to this document and/
or product at any time and without notice.
COPYRIGHT
NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer
fi
le, in any form or by any means
— electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise — without express written permission and consent
© Copyright 2013. All Rights Reserved.
Version 1.0 AUG 2014
TRADEMARK
ACKNOWLEDGMENTS
All products or service names mentioned in this document may
be trademarks of the companies with which they are associated.