9
REAR PANEL
REAR PANEL
q
MIC IN PORT & 48V/OFF/5V SWITCH:
Connect to a standard microphone using a 6.35mm plug. Set the switch based on the
phantom power requirements of the connected microphone.
Note:
If no phantom power is required, this switch should remain in the “Off” position to avoid potential damage to connected equipment.
w
ANALOG AUDIO INPUT 1~6 PORTS:
Connect to the analog stereo output of a device such as an audio player or PC.
Note:
By default, Analog Audio 1 is paired with the VGA input.
e
AUDIO OUT 5-PIN TERMINAL BLOCK:
Connect to powered speakers or an amplifier for analog stereo audio output.
r
AUDIO OUT L/R 2-PIN TERMINAL BLOCKS:
Connect to unpowered 4Ω speakers for analog stereo audio output. Up to 20W of
power is provided to each speaker.
t
TRIGGER IN 10-PIN TERMINAL BLOCK:
Connect to the Trigger Control Keypad (Optional) or any device with trigger switch
functionality such as window security alarms, motion detectors, door switches, etc. Each of the 8 triggers will activate an assigned unit
function when triggered.
Note:
A minimum of 5V DC is required to activate a trigger.
y
RELAY 1~2 2-PIN TERMINAL BLOCKS:
Connect to devices that can be powered and controlled via a DC 0~24V/5A relay connection
such as a curtain, projection screen, or lights.
u
IR IN PORT:
Connect to an IR Extender to receive local IR control signals and extend them to devices connected to the other end of
the HDBaseT™ connection. Ensure that the remote being used is within direct line-of-sight of the IR Extender.
IR OUT PORT:
Connect to an IR Blaster to transmit IR signals from the other end of the HDBaseT™ connection to devices within direct
line-ofsight of the IR Blaster.
Note:
IR can only be routed across a single HDBaseT™ connection at a time. The HDBaseT™ connection to use is defined within the
WebGUI or OSD menu.
i
RS-232 1 4-PIN TERMINAL BLOCK 1 (TOP):
Connect directly to a PC, laptop, or other serial control device with a 3-pin adapter
cable to send RS-232 commands to control the unit. RS-232 2 4-pin Terminal Block (Bottom): Connect to a PC, laptop, or serial controllable
device with a 3-pin adapter cable for the extension of RS-232 signals between this unit and the designated HDBaseT™ connection.
Note:
The 24 volt pins are included to provide power to a dedicated external control product and should NOT be used when connecting a
standard RS-232 device.
o
USB-C INPUT PORT:
Connect to USB Type-C video source equipment such as a PC or laptop.
Note:
Not all devices with USB Type-C ports can support video output. Please verify that the device supports video output from the USB
Type-C port before connecting it.
a
DISPLAY INPUT PORT:
Connect to DisplayPort source equipment such as a PC or laptop.
Note:
For 4K sources, use of cable that supports DisplayPort 1.2 or higher is strongly recommended.
s
HDMI INPUT 1~5 PORTS:
Connect to HDMI source equipment such as media players, game consoles, or set-top boxes. DVI
sources are supported with the use of an HDMI to DVI adapter.
d
VGA INPUT PORT:
Connect to VGA source equipment such as PCs or laptops.
f
HDMI OUT PORT:
Connect to an HDMI TV, monitor, or amplifier for digital video and audio output.
A
NEU
VIDEO
