A-Neuvideo ANI-527RX, Instruction Manual

Page: 9 / 20

7
OPERATION CONTROLS & FUNCTIONS
back Panel - RECEIVER
q
DC 24V TERMINAL BLOCK: Plug the 24V DC power adapter into this terminal block and connect
it to an AC wall outlet for power. (Optional)
Note: This connection is not required if the unit is receiving power via 24V PoC from the
Transmitter.
w
IR BLASTER PORT: Connect to an IR Blaster to transmit IR signals from the other end of the
HDBaseT™ connection to devices within direct line-of-sight of the IR Blaster.
e
IR EXTENDER PORT: Connect to the provided IR Extender to receive IR control signals and
extend them to devices connected to the other end of the HDBaseT™ connection. Ensure that the
remote being used is within direct line-of-sight of the IR Extender.
r
CAT5E/6/7 IN PORT: Connect to a compatible HDBaseT™ Transmitter with a single CAT5e/6/7
cable for transmission of all data signals. 24V PoC can also be supplied to, or received from, a
connected compatible Transmitter.
Note: The 24V PoC function is designed to power, or receive power from, compatible Transmitter
units only. Non-PoC Transmitters will need their own power supply. Other brands of Transmitter
may not be compatible.
t
HDMI OUT PORT: Connect to an HDMI TV, monitor, or amplifier for digital video and audio output.